Sure, there are plenty of lightweight XC forks out there, but racing demands so much more. Nimble handling, gram-obsessed weight, buttery damping—combined, they all make the difference between a good fork and a great fork. And with this in mind, the all-new RockShox SID World Cup Brain fork has been completely redesigned to meet the demands of XC racing, and hyperbole aside, we can confidently say that it sets the bar for race-worthy performance. The all-new Brain damper uses position sensitive technology for better chassis balance and traction. It does this while retaining the ability to separate rider input from bump events on the trail—just some of the incredible stuff that Brain is known for. The new technology can now remain active during the initial 25mm of travel, and this creates a much more balanced riding position and supple front-end feel. In turn, this goes a long way in reducing rider fatigue. And although the fork feels more active initially, as soon as you standup to get on the gas, the forward shift in weight naturally compresses the fork into the platform. So yeah, you'll feel well supported and efficient during hard sprint efforts. Incredibly, Brain does all this while keeping you in control and riding smooth on rough terrain without any need for extra cables and lockout levers on the handlebars. The World Cup Brain edition of the SID is not just a slight upgrade over the RLC and XX models, either. Along with the integrated Brain technology, it utilizes a carbon fiber steerer and crown, which reduce weight by over 100 grams and increases the overall stiffness. Also adding to the stiffness of is the short-travel-specific design. Leaving the 120-millimeter segment to the trail category, RockShox’s engineers were able to focus on the 80- to 100-millimeter travel range, and therefore develop lighter and stiffer uppers and air shafts. This new design, along with SRAM's Torque Caps (they create an enhanced interface between the hub and fork dropout), Power Bulge technology that reinforces the lowers, and 110-millimeter Boost spacing, keeps torsional stiffness high, allowing you to point-and-shoot while descending. Last, but certainly not least, on the feature spec is the Solo Air spring that’s customizable with RockShox’s Bottomless Tokens. The Solo Air spring lets you adjust pressure with a single Schrader valve that controls the pressure in both the positive and negative air chambers, making adjustments to pressure simple and intuitive. To customize ramp-up preference, RockShox’s Bottomless Tokens can be added to create a suspension curve that’s custom to your preferences. - Tapered Full Carbon Steerer tube - Top-adjust Brain damper w/ Position Sensitive technology - 110mm spacing with Torque Cap compatibility - 100mm of travel
- Chrome lugged crown with Tange CrMo legs/steerer - 41mm rake - Axle-crown: 365mm - Brake mount: caliper - Steerer: straight - Wheel (legs): 700c (curved)
- Lugged Cross fork to match the Double Cross Cyclocross frames - Lugged crown with Tange CrMo construction - Features eyelets for front rack and braze-ons for low-rider panniers - 44mm rake - Brake mount: cantilever
- Smoothie road fork is design to match the Smoothie frames - Tange CrMo construction - 49mm reach brakes - Wheel (rake): 700c (43mm) - Steerer: straight (28.6/30.0) - Axle-crown: 365mm - Brake mount: caliper
Looking to go rigid? Then check out Salsa's 80mm suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's 1-1/8" straight steerer lets you use it on older frames, or brand-spanking-new ones. It features Salsa's famous, forward-facing stainless steel fork ends and has room for tires up to 90mm wide. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out. - Salsa Classico CroMoly - Forward-facing, stainless steel dropouts - 1-1/8? threadless steerer (260mm) - 468mm axle-to-crown - 45mm rake - ISO disc tabs - Tire clearance = 90mm - Fender eyelets -1080g with full-length steerer tube
Salsa Firestarter Fork - Mid-blade and dropout rack mounts - Anything Cage mounts on front of fork - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Steel - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 1190 g - Wheel Size: 27.5+ , 29" , 700c - Maximum Tire Clearance (Fork): 3
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
- Slides over upper fork legs to prevent frame/fork contact - Works on 35mm boXXers only
$17.00 - $39.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
Ever wished you could lock out your front and rear RockShox suspension instantly and simultaneously, to get the extra edge for that final sprint to the finish or the grueling tarmac climb to the top of your favorite trail? Here comes RockShox's XLoc Full Sprint, which allows you to lock your SID or Revelation XX fork and your Monarch XX rear shock (all sold separately) with the simple push of your thumb. XLoc is a completely sealed, dependable lockout control, which works with a single thumb press: push to unlock, push again to lock. It’s that easy. Elite XC racers use their XLoc as often as their shifter, to gain that extra edge when sprinting out of corners or on smooth bits of the course. Now imagine being able to do the same with your fork and shock: that’s XLoc Full Sprint. Includes Motion Control X DNA comp damper, rear shock hydraulic hose, and bleed syringes.
The one-piece carbon monocoque WCS Carbon Disc Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, offering a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers has been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as well as possible in the areas in which they occur—such as side load, torsion, and impact. The WCS Carbon Disc Road Fork features a 46mm rake and includes a compression plug. Welcoming flat-mount disc calipers, this fork also fits up to 30mm tires, depending on tire make and model. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 46mm - Axle-Crown: 371mm - Rake/Offset: 46mm - Spacing: 40mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 390g (with uncut steerer / not including axle)
- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs
- Replacement damper kits
- Replacement leg guards for Dorado forks
- Lightweight alternative to suspension forks - Butted 31.8mm 4130 CrMo straight blades with shallow radius leg bends - Internally and externally butted steerer reduces weight, minimizes stress risers - 6mm thick CNC machined dropouts with safety lip feature - I.S. disc mounts - Axle to crown: 425mm - Rake: 36.7mm
The Beryl is a product aimed at the "set it and forget it" rider. The Beryl features all of the smooth qualities you've grown to expect from DVO in a condensed feature package. - D2 damper provides a 3-position low-speed compression adjuster to quickly go from a climb setting to wide open DH - OTT feature offers 3 settings of small bump compliancy to work with any air pressure or rider weight - Easy access external rebound adjuster provides a wide range to work with
Page 1 of 1