Other

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x8 Flat Head Screws

Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2

Replacement spacer pack for Wheels Mfg. 24mm (Shimano) bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 24mm ID - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer

Replacement spacer pack for Wheels Mfg. 30mm spindle bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 30mm ID - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- DT Swiss cartridge bearings - Sold in pairs

A 7x9 rail clamp for the 2014 Command Posts that gives the you the ability to run a Specialized carbon-railed saddle - Compatible with “Alien Head style” Command Post BlackLite and IR models - 7x9 rail clamps allow the use of carbon railed saddle on your mountain bike

These lightweight alloy bar end plugs provide a clean look and allow the use of bar ends on your Specialized carbon bar. - 100% CNC machined, 4-piece alloy design. - Dual side-loaded cylinder design ensures even pressure across full width of plug and bar end clamp. - Aluminum "lip" protects carbon bars from impacts. - Beautiful and clean machined design enhances handlebar looks. - Expansion range: 18.5mm to 20.0mm - Weight: 22g/pair - NOTE: Specialized bar end plugs are required for Specialized carbon bars.

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle

- Aluminum collars feature angled slots. - S-Works 32.6mm standard collar (14mm tall) fits all Specialized road frames with an aluminum outer seat tube sleeve - S-Works 31.8mm standard collar (14mm tall) fits all Specialized road frames with a 31.8mm outer seat tube diameter

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015

Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb

RockShox Reverb Hydraulic Hose Kit for replacing the hyraulic line on your Reverb dropper seatpost. - Fits all generations of Reverb - Includes new hose, new strain relief, new barb

KITE dropper post optional remotes and adapteors for top-left position, SRAM Matchmaker. - Mount for Kite dropper seatpost remote to SRAM Match Maker control system - MatchMaker Mount only